6 thoughts on “Isochronic Modulator Plug-in Updated”

  1. This update is a major improvement making clean isochronic beats. I use sine waves all the way through making the beats and they are clean as can be of harmonics. Pick sine wave, PSV=50, PW=100, “desired” beat frequency, and IMD=FMD=100. Then check out and use the Analyse > Plot Spectrum… and see how clean the spectrum is. The first version of isomod was OK , but more difficult to get rid of all the harmonics generated, primarily because we were limited to using square or rectangular wave shapes. Good “ole” Fourier Series synthesis in action.

    1. Thanks Paul, glad you like it.
      User feedback is always appreciated, and is the only way that I will know what users want.

  2. Having a great time using this plugin. I’ve been getting lost making far too many iso tone with this and learning a whole lot more. Thanks for the update.

    Cheers.

  3. Thank you for the up date
    I had to make a change to :
    ;control start-Hz “Initial Modulation Frequency” real “Hz” 0.01 0.01 100
    ;control end-Hz “Final Modulation Frequency” real “Hz” 0.01 0.01 100

    So I would be able to modulate from 0.05 to 100
    that covers Delta up through Gamma beats.
    Gamma could go higher depending on the base Frequency.

Leave a Reply to Steve Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.